Dual controllers, each with 4GB memory for PS-series firmware. Each controller provides cache to flash for data protection.

 

Twenty-four (24) 10K SAS hot-pluggable hard disk drives (Twelve (12) drive configuration available. Please contact your Dell Sales Representative for details.)

 

2.5" 10,000 RPM SAS drives available in 300 GB, 600 GB and 900 GB

 

7.2 TB using twenty-four (24) 300 GB 10,000 SAS disk drives

14.4 TB using twenty-four (24) 600 GB 10,000 SAS disk drives

21.6 TB using twenty-four (24) 900 GB 10,000 SAS disk drives

 

Up to 256

 

128 per volume / up to 2,048 total per group

 

Up to 256 per pool / 512 per group

 

Any standards-compliant iSCSI initiator

 

RAID 5, RAID 6, RAID 10, and RAID 50

 

10GbE connectivity with one (1) 10GBASE-T with RJ45, one (1) 10GbE SFP+ for fiber or twin-ax copper cabling, and one (1) 100BASE-TX dedicated management port per controller

 

IPv4, IPv6 core support

 

Can be combined with other EqualLogic PS Series arrays in the same SAN group, online. A maximum of two (2) PS4xx0 arrays can be in a group.

 

Vertical port sharing

Redundant hot-swappable controllers

power supplies / cooling fans, and hot-swappable disks

Individual disk drive slot power control

Cache-to-flash

 

Automatic spare configuration and utilization

SMART

Automatic bad block replacement

Auto-Stat Disk Monitoring System (ADMS) to monitor health of data on disk drives

 

SAN HeadQuarters multi-group performance and event monitoring tool

Serial console

Ability to configure a separate management network

SNMP, telnet, SSH, HTTP, Web (SSL), host scripting

Multi-administrator support

 

CHAP authentication

Access control for iSCSI

Access control for management interfaces including RADIUS support

 

SNMP traps, e-mail, syslog

 

AC voltage: 100-240 VAC ±10% single phase

700 W (max, total), +5V up to 155W; +12V up to 624W; +5Vsb up to 10W

Frequency: 50/60 Hz

Power factor: 0.98 (minimum)

Power supplies: Dual 700 W

 

Temperature range: 5° to 40°C (41° to 104°F) with a maximum temperature gradation

Storage temperature: -40° to 65°C (-40° to 149°F) with a maximum temperature

Altitude: For altitudes above 2950 feet, the maximum operating temperature is derated 1ºF/550 ft

Operating Relative humidity: 20% to 80% (noncondensing) with a maximum humidity gradation of 10% per hour

Operational shock: Half-sine shock 31G +/- 5% with a pulse duration of 2.6ms +/- 10% in operational orientations only

Operating Vibration: 0.26 Grms (5 to 350 Hz) for 5 minutes in operational orientations

Acoustics Category 4:   <=7.2 bels at 23C +/- 2C

Airborne contaminant level of G1 or lower as defined by ISA-S71.04-1985

 

Height: 2U / 8.68 cm (3.41 inches)

Width: 44.63 cm (17.57 inches)

Depth: 54.1 cm (21.3 inches)

Weight: 24.1 kg (53.1 lb)

 

Dell ReadyRails ^TM  sliding rails for square-hole 4-post and 2-post racks 1U/2U Rail Attachment Brackets, designed to enable PS Arrays to snap into place with screws or other hardware

Dell VersaRails sliding rails for 4-post and 2-post racks 1U/2U Rail Attachment Brackets, designed to enable PS Arrays to be mounted in racks whose posts have round holes

 

Length: 851 cm (33.50")

Width: 629 cm (24.75")

Depth: 395 cm (15.56")

 

36.2873 kg (80lbs)